| |
|
|
 |
iGuard Navigation |
 |
|
|
|
|
|
|
iGuard IP Appliance for Access Control and
Time / Attendance
FEATURES:
Multi-Factor
Authentication:
With iGuard,
users can be
authenticated and
verified through
either Fingerprint,
Smartcard or
Password. And
depending on the
different time
period, you can set
up the iGuard that
the users can just
simply presents his
smartcard to get
authorized (such as
during high-traffic
period), or requires
the high-security
fingerprint
verification (such
as after office
hours or during
weekends and
holidays).
Access Rights:
When you can
easily and
conveniently assign
different access
rights to your
employees, you can
plan your security
better and maximize
the effectiveness of
the human resources
. And with the
built-in Web Server
technology, iGuard
empowers you to
manage the access
rights of each
individual employees
or a group of
employees easily
anytime, anywhere
using any
web-enabled
computers or mobile
devices. For
example, you can
assign the staff
members of the
marketing department
the rights to get in
the office premises
during weekdays from
nine to five only,
or prevent a
particular employee
from entering the
computer server
room.
Reports:
iGuard includes
three built-in
reports: Access Log,
Attendance Report &
Daily In/Out report,
that can be accessed
via any web-enabled
computer with web
browser. Should more
sophisticated
reports be required,
such as for the
payroll purposes,
the information can
be downloaded and
saved in Microsoft
Excel format and in
plain text format.
In addition, the
access records can
be saved in any PC
in the network in
the popular ODBC
database format in
real-time manner,
and other
applications can
conveniently obtain
the information from
the ODBC (the
required software,
iServer is available
free-of-charge in
our download page)
Economical:
All the necessary
hardware and
software is built-in
to the device,
including the
hardware to connect
the system to the
corporate network.
All you need to do
is to plug-in the
popular RJ-45
network cable to the
back of the device.
No other hardware
and wiring is
necessary. In
contrast, all other
existing security
systems use the old
RS232 & RS485 wiring
system to connect to
the dedicated
computers (not to
the corporate
network), and it
usually involves a
lot of extra wiring
works. 5. Small
Footprint:
iGuard is a
wall-mounted unit
elegantly designed
with extremely small
footprint. In fact,
it is the smallest
stand-alone
biometrics device
available in the
market today. It can
be mounted easily
and conveniently
without requiring a
lot of space.
Simplicity:
iGuard is an
Internet-Ready
Security System, and
is the first and the
only network
appliance security
product in the
market that uses
TCP/IP as the
protocol to
communicate with
other iGuards and
the outside world.
The protocol enables
the device to
directly connect to
the corporate
network via the
existing cable
wiring. And since
the TCP/IP protocol
is the Internet
protocol, it allows
all computers in the
corporate network to
access the device
using the Internet
Browser software. As
a result, users do
not need to learn to
use a new software
to access and
administer the
device, and most
users can start
using the device in
minutes. In
contrast, all other
similar security
systems use
proprietary protocol
& wiring, and
proprietary software
is required to
access these
systems.
And for
compatibility
purposes, iGuard
also supports
conventional
interfaces including
Wiegand OUTPUT, RS-485 &
RS-232.
Security: IG-ER-01
The IG-ER-01 Secure
Strike Relay
controller further
increases the
security level by
controlling the door
strike from inside
of the premises.
With this optional
controller, the
iGuard sends a
special signal to
this controller to
open the door,
rather than directly
open the door with
the internal relay.
Because this
optional controller
is installed inside
the premises, it is
now impossible for
the intruders to get
into the premises,
even if they destroy
the iGuard.
|
|
View
Cart
