 Drill
Holes:
Drill holes as marked on
the included install
template. (It is very
important to drill the
exact size hole. |
 |
 Install
the lock body (1):
Press the mortise into
the lock cavity in the
door, and fix it with
screws firmly. Then
check the popup
situation of the lock
tongue. |
 Install
the lock body (2):
Pull the leads and check
the location of every
installing hole, then
fix the outside parts on
the door. |
|
|
 Install
the lock inside body
(3):
Join the leads
connecting plugs of
inside and outside
handle parts. Then
connect the square axis
with knob axis. Make
sure that the inside and
outside handle parts are
reliably connected with
lock body. After this,
screw firmly the fixing
bolts of the battery box
cover. |
|
|
 Install
dead bolt
With the dead bolt in
the locked position,
place the locking lever
horizontally on the
door. |
 Test
Function
Check to see if every
function works properly.
Then install the code
box cover. |
View
Cart
Users
Guide